Follow DCGF on Twitter
August
12

Transform Butcher Blocks into Desk Organizers

Get ready to get back-to-school cool by turning a butcher block into a desk organization station! This craft is ideal for your student, home office space, or your kid’s arts and crafts supplies. These also make great gifts, especially when you pick a theme that matches the recipient’s favorite hues or school colors.

knife blocks found at Goodwill

Tim's tin cans

Ability level:  Moderate

Age Level:  Teens and adults 

Items needed:

  1. Wooden knife block
  2. Spray paint
  3. Drill
  4. Empty soup cans or other metal containers
  5. Small wood screws
  6. Scrapbook or other paper
  7. Modge Podge
  8. Scissors
  9. Painter’s tape
  10. Additional options like clothespins, pipe clamps, small hooks

Time requirement:  2 hours (not including paint and Modge Podge drying time)

Cost: Approximately $10 each

  • $3 per knife block
  • $5 per can of spray paint (lots left over!)
  • $5 for Modge Podge (lots left over!)
  • $.50 for clothespins, pipe clamps
  • $0 for old cans, tins

Knife blocks found in Wood section of Goodwill

Step 1:  Hunting Time

Every Goodwill retail store has an aisle full of baskets and wooden items.  Waiting there will be a variety of butcher blocks that look a little lost without any knives or tools in them.  These make a great, solid base which is ideal for this fun transformation.

Tim drills holes into knife block

Step 2:  Drill in the transformation

To ensure all of the holes you drill are the same depth, place a piece of painter’s tape on the end of the drill bit where it goes into the drill. Remember, to put on your goggles or protective eyewear before you begin drilling.  With a large-sized drill bit (3/8 or bigger) drill holes in the place where there are currently slits used to hold knives.  

Tim's can with a drilled hole

Tim's drilled butcher blocks

Step 3:  Screw on additional containers

To give additional storage options, use empty soup cans or other small metal containers. For my project, I even used an Altoids box! 

Place the can on its side and with a hammer and nail, create a hole that will be used to attach it to the knife block. Position the can next to the block with the hole created by the nail so that it is flush against the wood.  Next, use a Sharpie to mark the hole. While using a much smaller bit, drill a small hole.  Grab your screwdriver and screw in a wood screw to secure the can/container to the block.

Tim's knife block painted with black chalkboard paint

Tim's knife block painted blue

Step 4: Spray paint connects pieces

Place your knife block with the attached cans on a tarp outside or in a well-ventilated space.  Add a light coat of spray paint over the entire piece.  Be sure to add a layer of paint on the inside of the cans, too.  Let it dry, then place it on its side while you add another light layer. Repeat as needed to ensure solid coverage. 

Tim's gift bag, Modge Podge, scissors, permanent marker, and painted butcher block

Tim applies Modge Podge to the map of the blue knife block

Step 5:  Paper hides old slots

To mask the old knife slots and to give the piece a polished look, trace and cut a piece of paper (maps, craft paper, and gift bags are fun options) to place over any of the surfaces where you drilled.  Use Modge Podge to adhere the paper to the piece; brush on a light layer to the surface. Next, place on your paper and add another layer of Modge Podge.  Let this dry.

Step 6: Pop out holes

With a screwdriver, puncture the paper over the areas where you drilled the holes.  Based on the thickness of the paper, you are likely able to feel the holes beneath.  You may want to use a sharp craft knife to trim away any access paper from the holes.

Step 7: Add additional storage accessories

Consider adding clothespins to hold small papers and notes or hooks for a place to hang keys.   Use your drill and wood screws.

Tim poses with finished black upcycled knife block

Tim poses with upcycled green knife block

Tim poses with finished upcycled knife block painted blue

Tim's three completed knife block upcycle options

Step 5:  Place in your workspace!

Based on how you will use this creative organizer, add items now.  One of my options holds kid’s art supplies.  The second is ideal for your home office as a place for paper clips, pens, letter openers, and more.  A third, painted with chalkboard paint, gives you a space to write messages and reminders.  Though this repurposed project no longer holds knives, it certainly is sharp!

Tim Kime is an artist, life coach, connector. He is President of Kime Leadership Associates offering executive coaching, meeting facilitating and motivational speaking.  He is also Chief Creative Force of Transformation Junkies which upcycles furniture and other household items into functional works of art. He combined his two passions—unleashing the potential in people and transforming items with the launch of the Art of Possibilities Workshops.  These workshops are part upcycling, part dreaming, part goal setting.

Share on Facebook Tweet this Post Pin this Post RSS Feed

« |

No comments yet.

Leave a comment

You must be logged in to post a comment.